This compact, easy to mount USB Power Port is the answer for powering and charging your USB accessories including cell phones, most GPS units, MP3 players and some digital cameras. This port will also charge USB OTG devices such as the Motorola RAZR when used with a UPS charging cable. It mounts easily to any surface using the Universal Mounting System. A tethered seal cap protects the power port from dust and water.The DIN 4165 plug makes installation a simple operation: just attach the TAPP Lite using the Universal Mounting Bracket and plug the DIN 4165 (BMW) plug into your BMW socket. The short cable lengths (6” or 12”) ensure that the installation is clean and uncluttered with excess wire and cable.

• Input Voltage: 12V ± 4.0V
• USB (Output) Voltage: 5V ±.25V
• Output Current: 1A Max.
• Protection Rating: IP64 (Water wash down) when capped. None when in use (USB Cable plugged in)
• Operating Temperature Range: 0°F to 105°F
• Cable Jacket: Abrasion resistant, UL/CSA listed, meets Mil-I-631D, -4°F to 221°F
• Cable length: 6” (150-0042-06) or 12” (150-0042-12)
• Electrical protection: Internal auto-resetting fuse, internal auto over-temp power control, diode protected against inadvertent reverse polarity.
• Cable Plug: DIN 4165 (BMW)
• Seal Cap: Integral Mounting: 3BR Powersports Universal
• Mounting System (Patent Pending)
• Powers: Most cell phones including Apple iPhone, LG EnV, Blackberry, & Motorola Razr (requires charging cable). Also Garmin GPS, Apple iPod, and any other device that charges using 1A or less of USB power.